[1] LEBLANC J, HUTCHISON C, HU Y, et al. A comparison of orthopaedic resident performance on surgical fixation of an ulnar fracture using virtual reality and synthetic models[J]. J Bone Joint Surg Am, 2013, 95(9): 1.
[2] 李晓峰. 3D打印技术在骨科临床教学中的应用[J]. 微创医学, 2018, 13(2): 217.
[3] PUJOL S, BALDWIN M, NASSIRI J, et al. Using modeling techniques to enhance teaching of difficult anatomical concepts[J]. Acad Radiol, 2016, 23(4): 507. doi: 10.1016/j.acra.2015.12.012
[4] 唐昊, 赵瑞, 沈洪兴, 等. 规范化关节镜微创技术临床教学模式的应用与研究[J]. 中国医学教育技术, 2013, 27(4): 435. doi: 10.3969/j.issn.1004-5287.2013.04.021
[5] 李杨, 田华, 张克. 3D打印技术在骨科膝关节置换术教学中的应用[J]. 中华医学教育杂志, 2018, 38(5): 734. doi: 10.3760/cma.j.issn.1673-677X.2018.05.022
[6] LEE V, SINGH G, TRASATTI JP, et al. Design and fabrication of human shin by three-dimensional bioprinting[J]. Tissue Eng Part C Methods, 2014, 20(6): 473. doi: 10.1089/ten.tec.2013.0335
[7] RENGIER F, MEHNDIRATTA A, VON TENGG-KOBLIGK H, et al. 3d printing based on imaging data: Review of medical applications[J]. Int J Comput Assist Radiol Surg, 2010, 5(4): 335. doi: 10.1007/s11548-010-0476-x
[8] JONES DB, SUNG R, WEINBERG C, et al. Three-dimensional modeling may improve surgical education and clinical practice[J]. Surg Innov, 2016, 23(2): 189. doi: 10.1177/1553350615607641
[9] AWAN OA, SHETH M, SULLIVAN I, et al. Efficacy of 3D printed models on resident learning and understanding of common acetabular fracturers[J]. Acad Radiol, 2019, 26(1): 130. doi: 10.1016/j.acra.2018.06.012
[10] KIM MS, HANSGEN AR, WINK O, et al. Rapid prototyping: A new tool in understanding and treating structural heart disease[J]. Circulation, 2008, 117(18): 2388. doi: 10.1161/CIRCULATIONAHA.107.740977
[11] ALLEN LK, EAGLESON R, DE RIBAUPIERRE S. Evaluation of an online three-dimensional interactive resource for undergraduate neuroanatomy education[J]. Anat Sci Educ, 2016, 9(5): 431. doi: 10.1002/ase.1604
[12] SO E, HYER CF, RICHARDSON MP, et al. What is the current role and factors for success of the journal club in podiatric foot and ankle surgery residency training programs?[J]. J Foot Ankle Surg, 2017, 56(5): 1009. doi: 10.1053/j.jfas.2017.04.028
[13] 陈家磊, 方跃. 3D打印技术在复杂创伤骨科病例教学中的应用[J]. 中国继续医学教育, 2019, 11(28): 32. doi: 10.3969/j.issn.1674-9308.2019.28.014
[14] 李潍, 孔元蓉, 黎静, 等. PBL与EBL教学联合3D打印技术在骨科临床教学中的应用[J]. 现代医院, 2017, 17(12): 1743. doi: 10.3969/j.issn.1671-332X.2017.12.008
[15] 高鹏, 杜悠, 边焱焱, 等. 3D打印技术及VR技术在重度下肢畸形矫正临床教学中的应用[J]. 中华骨与关节外科杂志, 2019, 12(9): 712. doi: 10.3969/j.issn.2095-9958.2019.09.14
[16] 刘昌艺, 张逢乐, 杨辉, 等. 3D打印技术在复杂股骨粗隆间骨折的临床PBL教学中的应用[J]. 组织工程与重建外科杂志, 2017, 13(6): 360. doi: 10.3969/j.issn.1673-0364.2017.06.017
[17] 梁晓南, 姚军, 赵劲民. 将3D打印模型引入Sandwich教学中的应用研究——以骨科见习教学为例[J]. 微创医学, 2017, 12(1): 75.
[18] LIM PK, STEPHENSON GS, KEOWN TW, et al. Use of 3D printed models in residenteducation for the classification of acetabulum fractures[J]. J Surg Educ, 2018, 75(6): 1679. doi: 10.1016/j.jsurg.2018.04.019