[1] 臧全金, 历强, 梁辉, 等.寰枢椎脱位手术后翻修的原因及策略[J].中国脊柱脊髓杂志, 2017, 27(3):220. doi: 10.3969/j.issn.1004-406X.2017.03.05
[2] BANERJEE S, ISSA K, KAPADIA BH, et al.Systematic review on outcomes of acetabular revisions with highly-porous metals[J].Int Orthop, 2014, 38(4):689. doi: 10.1007/s00264-013-2145-5
[3] XU N, WEI F, LIU X, et al.Reconstruction of the upper cervical spine using a personalized 3D-printed vertebral body in an adolescent with ewing sarcoma[J].Spine(Phila Pa 1976), 2016, 41(1):E50. doi: 10.1097/BRS.0000000000001179
[4] 刘永庆, 李琪佳, 崔逸爽, 等.多孔金属骨科内植物的研究进展[J].中国老年学杂志, 2017, 37(12):3080. doi: 10.3969/j.issn.1005-9202.2017.12.102
[5] SUR S, NEWCOMB CJ, WEBBER MJ, et al.Tuning supramolecular mechanics to guide neuron development[J].Biomaterials, 2013, 34(20):4749. doi: 10.1016/j.biomaterials.2013.03.025
[6] ARABNEJAD S, BURNETT JR, PURA JA, et al.High-strength porous biomaterials for bone replacement:A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints[J].Acta Biomater, 2016, 30(8):345.
[7] WANG X, XU S, ZHOU S, et al.Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants:A review[J].Biomaterials, 2016, 83(3):127.
[8] CHIKARAKARA E, FITZPATRICK P, MOORE E, et al.In vitro fibroblast and pre-osteoblastic cellular responses on laser surface modified Ti-6Al-4V[J].Biomed Mater, 2014, 10(1):015007. doi: 10.1088/1748-6041/10/1/015007
[9] YANG J, CAI H, LV J, et al.In vivo study of a self-stabilizing artificial vertebral body fabricated by electron beam melting[J].Spine(Phila Pa 1976), 2014, 39(8):E486. doi: 10.1097/BRS.0000000000000211
[10] ARANDA JL, JIMéNEZ MF, RODRíGUEZ M, et al.Tridimensional titanium-printed custom-made prosthesis for sternocostal reconstruction[J].Eur J Cardiothorac Surg, 2015, 48(4):e92. doi: 10.1093/ejcts/ezv265
[11] PULEO DA, NANCI A.Understanding and controlling the bone-implant interface[J].Biomaterials, 1999, 20(23/24):2311.
[12] DOIK, OUE H, MORITA K, et al.Development of implant/interconnected porous hydroxyapatite complex as new concept graft material[J].PLoS One, 2012, 7(11):e49051. doi: 10.1371/journal.pone.0049051
[13] CHENG A, HUMAYUN A, COHEN DJ, et al.Additively manufactured 3D porous Ti-6Al-4V constructs mimic trabecular bone structure and regulate osteoblast proliferation, differentiation and local factor production in a porosity and surface roughness dependent manner[J].Biofabrication, 2014, 6(4):045007. doi: 10.1088/1758-5082/6/4/045007
[14] 王雷, 李强.不同孔隙率多孔钛铌合金的生物力学强度及细胞生物相容性[J].中国组织工程研究, 2016, 20(38):5709. doi: 10.3969/j.issn.2095-4344.2016.38.013
[15] COOK SD, BARRACK RL, THOMAS KA, et al.Quantitative analysis of tissue growth into human porous total hip components[J].J Arthroplasty, 1988, 3(3):249. doi: 10.1016/S0883-5403(88)80023-8
[16] LV J, JIA Z, LI J, et al.Electron beam melting fabrication of porous Ti6A14Vscaffolds:cytocompatibility and osteogenesis[J].Adv Eng Mater, 2015, 17(9):1391. doi: 10.1002/adem.v17.9
[17] 周鹏, 赵辉, 吴宇黎, 等.钛合金假体表面涂层微孔孔径和孔隙率对骨整合的影响[J].山东医药, 2017, 57(16):12. doi: 10.3969/j.issn.1002-266X.2017.16.004
[18] KUJALA S, RYHÄNEN J, DANILOV A, et al.Effect of porosity on the osteointegration and bone ingrowth of a weight-bearing nickel-titanium bone graft substitute[J].Biomaterials, 2003, 24(25):4691. doi: 10.1016/S0142-9612(03)00359-4